Tel
+86-025-52203395,
+86-17715268382
What are you looking for?
Charger-Union including AC Chargers and DC Chargers. IEC AC Chargers comply with IEC61851-1 standard, AC Chargers can be applied for household or commercial scenes, and DC Chargers are suitable for industrial charging scenarios.
The AC charging pile is characterized by simple installation and low cost. It is suitable for places where you need to stay at home or overnight. It takes 8 hours to fully charge a family car. The installation of DC charging piles is very complicated and requires high-voltage power and transformer equipment. Usually, large commercial areas will install DC charging stations. The advantage is that it only takes two hours to fully charge a family car.
It is more convenient to install AC charging piles. If you are a single house, you only need to buy charging piles, and you can contact the local installation company for door-to-door installation. If you have electrician or installation experience, you can also install it yourself. If it is a community residence, you need to contact the community to understand the corresponding matters.
The IEC AC charger has RCD function, which can detect the residual current of the product and provide leakage protection. Up to IP55 protection level, which can better protection to users and prolong the life spand of the car charger for electric car. The IEC DC charger is stylished designed and adopted the patented technology with the all-aluminum Z-shaped shutter, which can dissipate heat better, and be well painted in line with different branding. ALL CHARGE-UNI car EV charger are capable of supporting online status diagnosis, and realize remote upgrade through OTA. The dual charging cables achieve equal distribution of power and the efficiency is up to 95%, which maximizes the charging efficiency and saves your time.
EV AC chargers support WIFI connection and you can also chose LAN connection.
DC charger supports CCS2 and CHAdeMO mode.
It can diagnosis online and realize OTA remote upgrade.
AC charger is up to IP55 level and DC charger is up to IP54 level.
IEC 61851-1 specifies the general requirements for the charging system and is a programmatic document of the IEC 61851 series of standards. In the third edition issued in February 2017, the requirements for AC charging facilities were integrated. Supersedes IEC 61851-22; 2001 Standard for AC charging facilities. IEC 61851-1 is applicable to on-board and off-board charging equipment for electric vehicles with a nominal maximum value of 1000V AC and a nominal maximum value of DC 1500V. The standard specifies 4 charging modes, 3 charging connection methods, charging interfaces and its related requirements, etc.
